EZ 1-5-2 Portable Concrete Mixer Batching Plant – Automated 1.3+ Cubic Yards
Interactive 3D Model
Computer Automated
1.3 Cubic Yards
(35.1 Cubic Feet)
23ft Length
Easily Transported
Custom Colors Available
The EZ 1-5-2 is a computer automated portable concrete mixer and concrete batch plant that can mix just over 1.3 cubic yards (35.1 cu ft) of concrete. This mobile concrete mixer can be towed into very remote job sites where a concrete mixer truck cannot go and mix on site. The total length of this concrete batch mixer is 23 feet with the tongue removed.
The Standard Auto Control controls sand, rock, water, and cement (7SL silo) by weight. The auto control calibrates in both English or Metric units.
The auto concrete mixer rotating drum design provides a superior finished product compared to volumetric concrete mixer designs.
​
The Flow-Through Drum design rapidly mixes low slump concrete. Dry material enters on one side of the drum and discharges wet concrete on the opposite side. The concrete mixes horizontally, rapidly, and consistently. The flow-through drum design is superior to standard closed drum designs. The cycle times are 2 to 5 minutes. This drum design is similar to the EZ 2-8-2, but with a smaller diameter. The EZ 1-5-2 is container ready and will fit in the cargo bay of most transport aircraft.
​
The EZ 1-5-2 auto concrete mixer batching plant frees you from the time, distance, and schedule limitations of third-party concrete plants. The EZ 1-5-2 enables you to load and mix your own specific concrete recipe how, when, and where you want it.
Additional Info on
EZ 1-5-2 Portable Concrete Mixer Batching Plant – Automated 4 Cubic Yards
Standard Equipment:
Optional Equipment:
Motor Options
For all our Concrete Mixer Batching Plants, we offer the optimal motor type for your application.​
​
-
Diesel: Diesel engines offer superior fuel economy compared to gasoline engines. They are an excellent choice for remote locations, yards, and quarries where diesel fuel is more readily accessible.
​​
-
Electric: Electric motors are the most reliable and efficient system available. They require a minimum of 3ph 480 volt power, and we customize the electrical panel to meet your specific power requirements.
​
-
Combinations: The combination of electric and diesel motor systems provides unparalleled versatility. This option allows you to optimize efficiency by selecting the most effective power source available for your situation.
Equipment Chart
Shipping Info
Interested in Continuous Flow Applications?
Let's talk about the Holding Hopper
The Holding Hopper allows the batch plant to operate independently of the concrete pump.
The less expensive EZ 1-1 with no Auto Controls is available as a comparable alternative model. Its hopper is instead measured with sand and gravel volumetrically – bucket of your loader. The water meter measures exact water readings for yardage control. Cement is loaded into the mixer with a silo or directly onto the belt with the standard bag breaker. Print tickets are not available with this model. This machine is less accurate, but effective where spec concrete is not required.