The EZ 4-24-2 is a portable concrete mixer and concrete batch plant that is computer automated and mixes four (4) cubic yards (108 cu ft) of concrete. This mobile concrete mixer batcher can be towed into very remote job sites where a concrete mixer truck cannot go and mix on site. The total length of this portable concrete mixer and batch plant is 45 feet with the tongue removed.
The standard Auto Control feature controls sand, rock, cement, and admixtures by weight, and water by volume. The Auto Control calibrates in English or Metric units.
The rotating drum design provides a superior finished product compared to volumetric concrete mixer designs.
The EZ 4-24-2 is a portable concrete mixer and concrete batch plant that is computer automated and mixes four (4) cubic yards (108 cu ft) of concrete. This mobile concrete mixer batcher can be towed into very remote job sites where a concrete mixer truck cannot go and mix on site. The total length of this portable concrete mixer and batch plant is 45 feet with the tongue removed.
The standard Auto Control feature controls sand, rock, cement, and admixtures by weight, and water by volume. The Auto Control calibrates in English or Metric units.
The rotating drum design provides a superior finished product compared to volumetric concrete mixer designs.
The 100 cubic ft batch mixer Flow-Through Drum design rapidly mixes low slump concrete. Dry material enters on one side of the drum and discharges wet concrete on the opposite side. The concrete mixes horizontally, rapidly, and consistently. All EZ horizontal mixer designs mix slump concrete loads consistently.
The 100 cubic ft batch mixer flow-through drum design is superior to standard closed drum designs. Cycle times are seven to ten minutes. The standard HH-4 holding hopper ensures the mixing process continuous pumping output.
The EZ 4-24-2 frees you from the time, distance, and schedule limitations of third-party concrete plants. This portable concrete mixer also enables you to load and mix your own specific concrete recipe how, when, and where you want it.
The EZ 4-24-2 includes an Auto Control processor, load scales with the Rock Hopper and Sand Hopper, cement control (if 7SL-80 or 7SL-120 Silo are used), and water control.
The Right Manufacturing Systems programmable 1280i computer comes pre-programmed for user convenience. Over 100 different designs can be input for batching ease. Materials are weighed individually per batch and weighed by the decumulation method – weight is being added as material comes out of the bins to achieve the target weight of rock, sand, cement, and water individually on a per load basis. This is the most reliable and accurate way of consistently batching each load of concrete. Print tickets are an option with the Auto Control.
Includes weight scales on the single hopper for more accurate measurement of sand, gravel, and cement. Materials are weighed individually to achieve the correct weights of rock and sand on a per load basis as you load the hopper to your specified mix design. Or, the bin can be filled completely with premix gravel and sand and the bin can be unloaded easily by a decumulation method with the weight scales.
The hydraulic water pump teamed with the 500 gallon auto tank gives you the freedom of a no worry water source. Water may be sourced from a stream, pond, or the large water tank.
Hot Water Boiler
Pressure Washer Controls
Hot Water Boiler
Pressure Washer Controls
All models are painted white. Other paint schemes are additional.
We offer you the motor choice that will work best for your operation.
The diesel engine gets better fuel economy than the gasoline engine. A good choice for mines, yards and quarries where diesel fuel is more readily accessible.
The electric motor is the most reliable and efficient motor system. It requires a minimum of 480 three phase power. We will build the electrical panel to your power requirements.
The combination electric and diesel motor system is the most versatile choice. This option enables you to optimize the most efficient power source available.
= standard = optional | ||||
Model | EZ 4-24-2 30-36 YD³ Per HR | EZ 4-12-2 28-34 YD³ Per HR | EZ 2-8-2 18-22 YD³ Per HR | EZ 1-5-2 8-10 YD³ Per HR |
Auto Control | ||||
Hopper Scales | ||||
Pallet Platform | ||||
Pallet Jack | ||||
Water Pump | ||||
Electric Motor w/ Panel | ||||
Pressure Washer | ||||
Hot Water (Diesel Fuel) | ||||
Bag Breaker | ||||
Silo Chute | ||||
Diesel Engine | ||||
Auto Water Tank |
Automatic Wet Batch Plant Combo | Weight | Overseas Shipping Container |
EZ 4-24-2 | 19,500 lb | 45 ft High Cube |
EZ 4-12-2 | 14,000 lb | 45 ft High Cube |
EZ 2-8-2 | 11,500 lb | 40 ft High Cube |
EZ 1-5-2 | 9,000 lb | 40 ft High Cube |
Holding Hopper
ATTENTION! This machine CAN NOT BE TRANSPORTED WHILE LOADED WITH WET OR DRY MATERIALS. It must be stationary for operation.
Note:
The less expensive EZ 4-5 with no Auto Controls is available as a comparable alternative model. Its hopper is instead measured with sand and gravel volumetrically – bucket of your loader. The water meter measures exact water readings for yardage control. Cement is loaded into the mixer with a silo or directly onto the belt with the standard bag breaker. Print tickets are not available with this model. This machine is less accurate, but effective where spec concrete is not required.